New mobile scissor lifting machine instructions-Anson

If you happened to be searching for some useful info about aerial lifting machinery, here is the details of the Instructions for safety procedures of using mobile scissor lifting machine.

1. Place the machine on a firm, level and barrier-free workplace, and move the machine to the place just below the work area;

2. Install the extension legs and adjust the horizontal position of the machine with the O-Level device;

3. Connected to a suitable power source (AC 220V, the power cord is not less than the outer lead 1.5MM2);

4. Turn air switch to the ON state using the electrical control box;

5. Unscrew the red emergency stop button;

6. When workers entered the work platform operating room or lift operation control buttons control platform is operated by the ground staff, press the green button to rise (increased first rise after four double mast test), red button down black button is the double mast rising priority button (press green button while holding on black means double-mast rising), in case of emergency, please press the red button emergency brake off the machine power.

7. If electronic control platform can’t fall, you can use jettisoning switch, counterclockwise it to make the platform fall, tighten switch clockwise when the platform falls after jettisoning.